Stainless Steel Wires - Cold Heading Quality
Wire suitable for Fastener and Cold Heading applications such as bolts, nuts, screws, rivets, nails, etc. Steel’s Wire for CHQ is made by choosing selected quality wire rods and special heat treatment process. This enables the production of wire of desired surface and micro-structure necessary for superior products in spite of several stringent conditions.
Characteristics of CHQ Wire
Uniform coated surface
Strict control of chemical composition
AISI 304 /(L), 316 /(L), 302HQ (XM-7), 304HC, 430, 434, 410, etc.
|Diameter (mm)||rade (AISI)||Tolerance||Tensile (N/mm²)||Packing|
|0.80 - 2.00||304 /(L), 316 /(L)||DIN h9||600 - 750||Coils/ Pay-pack Drums|
|2.01 & above||550 - 700||Coils/ Pattern laid coils|
|0.80 - 2.00||302HQ, 304HC||DIN h9||500 - 650||Coils/ Pay-pack Drums|
|2.01 & above||450 - 630||Coils/ Pattern laid coils|
|0.80 - 2.00||410, 430, 434||DIN h9||500 - 700||Coils/ Pay-pack Drums|
|2.01 & above||450 - 600||Coils/ Pattern laid coils|
Ask for any other specifications not mentioned in above table.