Cutting/Gauging Electrodes

SUPER POWER CUT

Application

Description

Electrode for cutting of all kinds of metals-alloyed & unalloyed steels, non-ferrous metals, cast iron & cast steels.  

 

Applications : 

Metal Cutting, Piercing Holes

 

Welding recommendations:

A light reciprocating movement will help to drive the molten metal out of the kerf. The easiest way by horizontal pieces is to held on an angle of 45° in cutting direction. At vertical pieces an angle of 60°, downwards is recommend. Moistured electrodes should be re-dryed up to 70 °C for about 30 minutes.

Request Form